|
Front Loading Washing Machine (Semi Automatic)
We hold expertise in manufacturing, supplying and exporting a complete line of Front Loading Washing Machine (Semi Automatic) which is known across the globe owing to its durable finish standards, high efficiency and longer service life. Easy to install, load & unload, these are largely used in Hospitals, Naval Ships, Nursing Homes and Garment Processing Industry. Designed for continuous operation, heavy-duty use and suit customers requirement for carrying out different processes like stonewash, softener wash, enzyme wash and silicon wash on garments, these Front Loading Washing Machine (Semi Automatic) can be purchased by customers at genuine rates.
Inner Drum
Fabricated from stainless steel of 1.6 mm to 5 mm (as per capacity of machine) 304 AIST OR 316 AIST quality. A die sunk perforation for smooth inner surface. Provision with lifters for effective tumbling of load with process chemicals.
The inner drum has a large front opening. The inner drum is cantilever supported on heavy duty bearings with special bearing housing at the rear. Front & back plates of inner drum are of stainless steel 304 L OR 316 L quality duly stiffened. The entire assembly is aligned & balanced.
Outer Drum
The outer drum fabricated from stainless steel sheets of 304 AIST OR 316 AIST quality. The back plate & the drum are supported on a strong base frame.
- The outer drum is provided with: Direct injection steam inlet coupled to temperature control system
- Indirect steam coil heating system. (optional)
- Cold water inlet
- Hot water inlet (optional)
- A large hinged door at the front for loading and unloading
- A small sampling door with in the main door
- Chemical feed hopper (manual controlled)
- Non-clog drain valve
- Liquor level indicator with liquor sampling port
- Flow Meter(Optional)
The back plate, front plate & the base frame support the drive assembly, exterior panels and electrical / electronic control system.
Drive System
A continuous rated heavy duty motor drives inner drum through a gear box/motors ,set of pulleys and belts and a set of sprockets, chain and timing belt.
Electrical / Electronic Controls
Control and operating panels are supplied along with the machine either as an integrated parts or as a separate system and designed as per customers requirement. Drive is controlled by inverter drive. All necessary control are required for smooth and safe operation of the machine is provided. The electrical system in addition to the motor includes solenoid valve for water inlet, drain valve and steam, overload relays, level sensor, contractors. The electronic system consists of cycle timer, forward reverse timer and temperature controller.
Automation (Optional)
- PLC (Logic Programmer)
- Flow Miter
- Tilting System For Machine
- Skada System
Safety Features
Safety of operator, load and machine is taken into account during the design of the machine and includes:
- Thermal overload protection for motor
- Inverter controller PLC based programs
- Automatic level controller
- Automatic temperature controller
- MCB Control for power and control circuit
- Outer drum door interlocked to drive Safety guards as required
Finish
- All mild steel parts painted/Powder Coated against corrosion
- All stainless steel parts polished
Supply The machine is delivered ready to connect and supplied along with installation operation maintenance manual including foundation installation plans, general arrangement drawing, circuit diagram etc.
|
